Mt2 Series Mobile Printer

Mt2 Detailed Printer Specifications

Printing Specifications
Printing Method: Direct thermal
Printing Resolution: 203 dpi (8 dots per mm)
Printing Speed: 2" (50 mm) per second maximum

Fonts/Graphics/Symbologies
Fonts: 7 Courier Font sizes including one rotated, downloadable fonts
Character Set: ASCII International and IBM graphic sets
Graphic Print: Bit addressable graphic command set;
Bar codes 39,128, 2 of 5, and UPC. Downloadable
fonts, graphics, logos and additional bar codes
Characters Per Line: 24, 32, 38, 40, 42, 48 (s/w command)
Character Size: 3x2, 3x1.5, 3x1.15, 3x1(H x W mm)
Print Contrast: Auto and user selectable

Communications
Interfaces: RS232C-RJ11 type and Infrared (IrDA) standard, Bluetooth ®
Baud Rate: 2.4k. 9.6k, 19.2k, 38.4k baud
Fast IrDA Transfer Speed: Up to 38.4k depending on computer capability
Standard IrDA Transfer Speed: 9600 connect and transfer
Handshaking: CTS/RTS and/or XON/XOFF

Print Media
Paper Type: Direct Thermal Roll, use Printek high quality 25 year archival rated paper for best results
Roll Size: Maximum roll diameter 1.5″ (3.8 cm), roll width 2.25″ (5.7 cm)
Roll Capacity: Approx. 60′ (18.3 m), Approx. 120 6″ long receipts
Core Size: 0.375″ (9.5 mm)

Power Management
Power: Removable rechargeable battery; DC input power jack for optional AC Adapter
Battery: 2 cell Lithium Ion, 7.4V; 2200 mAH
Battery Recharge: Internal fast 180 min., fast charge with auto switch to trickle charge; spike and surge protection
Paper Rolls Per Charge: >6 (over 800 6” receipts per charge)
Advanced Power Management: Battery saving Auto OFF feature with adjustable delay. Sleep mode with wake on data feature (standard model)

Operator Controls and Indicators
Status Indicators: 3 LEDS (2 multi-functioning) — Power/Lo Bat., Charging, Fault/MCR Ready
User Buttons: 2 buttons— ON/OFF, Feed
Paper-out Detection: By photo interrupter

Physical Specifications
W x L x D: 4.2 x 5.4 x 2.7" (11 x 14 x 7 cm)
Weight: 12 oz. (0.34 kg) empty; 16 oz. (0.44 kg) with bettery

Environmental Specifications
Operating Temp: 14 to 122°F (-10 to 50°C)
Storage Temp: -4 to 140°F (-20 to 60° C)
Humidity: Up to 90% RH (non-condensing)
Drop Test: 3’ to concrete
Agency Approvals: FCC Part B; CE, AS/NZ3548 Class B, CB Certified; ETL Listed, Control #3046813, meets IP54 standard

Memory
32kb SRAM, 128kB Flash

Software
Windows 95, 98, 2000, and XP printer drivers; .NET support; Windows CE and Pocket PC print utility and SDK from Fieldsoftware and Bachmann Software; Palm O/S print utility and SDK from Bachmann or Stevens Creek Software

Warranty
One-year printer warranty on the entire printer — case, battery, and print head included

Options and Accessories

• 3-track Simultaneous Read Magnetic Card Reader
• AC Adapter
• Spare Battery (Li-ION; 2200mAH)
• 2-bay Fast Charger
• In-Vehicle Adapter (12V or 24v)
• Coiled Data Cable, Terminated (Db9)
• Coiled Data Cable, Unterminated
• Environmental Case
• Shoulder Carrying Strap
• Belt Loop System (included as standard in basic unit)